Eastwood's Black automotive epoxy primers are user-friendly, 2-component primer/sealer that dries fast and maintains good color hold-out on steel, aluminum, fiberglass, body fillers and existing finishes.
Eastwood Black Epoxy Primer and Catalyst for Automotive Quarts 51121zp gtpracing
Product Overview:
Description
Eastwood Black DTM (Direct To Metal) Epoxy Primer 1:1 primes and seals with excellent adhesion and corrosion resistance. The Low VOC Formula is 50 State Compliant.
Our quart bottles of Eastwood Epoxy Primer and Catalyst are for DIYers who want small painting projects to look as good as big ones. This direct-to-metal black epoxy paint can be used as a primer, sealer or both. It’s ideal for chassis and suspension parts, hardware, trunks and other components that typically have a dark topcoat. In addition to bare steel and aluminum, you can also use epoxy primer on body fillers and fiberglass. The catalyst quickens the hardening process by up to 40% — and with an easy 1:1 mix ratio, there’s no guesswork.
Do the Job Right with this 2-component Eastwood primer that has a 100% customer satisfaction guarantee. It can be applied using a variety of HVLP paint guns with no induction time needed after mixing. The primer can also be wet-sanded after one day and dry-sanded after 2-3 days, allowing painters to level out imperfections before the finish coat. Visit the Eastwood Garage for free resource articles and videos about our automotive paints that are made in the USA.
Eastwood DTM Black Epoxy Primer Features:
- Can be used as a primer or sealer
- Excellent adhesion and corrosion resistance
- Fast Drying & Maintains good color holdout
- Sandable - 2-3 days
- Applied Over Steel, Aluminum, Fiberglass, Body fillers, Existing finishes
- 50 State Compliant Low VOC Formula
- Made in the USA
Eastwood's Black automotive epoxy primers are user-friendly, 2-component primer/sealer that dries fast and maintains good color hold-out on steel, aluminum, fiberglass, body fillers and existing finishes.
If you're sanding primer or body filler you have to check out the Eastwood Elite Contour DSB Dustless Sanding Block System that gives you laser straight panels while keeping you and your shop clean because it eliminates 95% of the sanding dust.
Specifications
MIXING RATIO
After shaking/stirring primer, thoroughly mix one part primer with one part catalyst. No induction time is required with this epoxy system.
SPRAY GUN SETUP
HVLP Gun: Fluid Tip 1.4-1.8 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.4-1.6 mm Inlet Spray Pressure 45-55 psi
Conventional Siphon: Fluid Tip: 1.6-1.8 mm Inlet Spray Pressure 45-55 psiAPPLICATION INSTRUCTIONS
Eastwood Epoxy Primer should be applied in medium wet coats, with a 30-minute flash period between each (at 70 °F). Typically, one to two coats is enough to achieve the desired 1 mil. dry film thickness, though more material may be applied as needed. Additional build requires longer flash periods between coats. Epoxy primer may be topcoated after approximately 30 minutes (wait 45-60 minutes after applying more than two coats), or up to about five days. After five days, primer MUST be scuff sanded prior to topcoat application. May be sanded (wet) the day after application. Wait two to three days before sanding dry.
