Eastwood Rust Encapsulator Aerosol Spray Paint Silver 15oz

Stop rust in its tracks! Our Silver Rust Encapsulator has been formulated with SUPERIOR corrosion resistance to "hardware store rust paints"!

• Formulated with corrosion resistance for greater durability (tested to 500 hours in a salt-spray chamber)
• Epoxy-fortified for better adhesion and topcoat compatibility
• Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
• Cures faster, and the low-VOC formula is acceptable in California
• 15-oz. aerosol covers about 10 sq. ft.
• 2%-10% Gloss Level
• As seen on "My Classic Car" TV show

You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.

Low 2-10% gloss Silver Rust Encapsulator. As easy to apply and as durable as our popular Red and Black. Perfect under metallic and gray finishes.

What's Included

2%-10% Gloss Level

Instructions & Guides

Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rust Encapsulator can 10-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.